205 views
H910 Plus industrial flat-old dust mask is NIOSH-approved respirator. It is designed to help workers against certain non-oil particles. It features N95 level, larger size, soft nose foam, and advanced anti-counterfeit filter media to help ensure good air permeability, comfort, as well as secure seal. It provide users with a good solution for safe and comfortable particles protection.H910 Plus industrial flat-old dust mask is NIOSH-approved respirator. It is designed to help workers against certain non-oil particles. It features N95 level, larger size, soft nose foam, and advanced anti-counterfeit filter media to help ensure good air permeability, comfort, as well as secure seal. It provide users with a good solution for safe and comfortable particles protection.
This product can be used for non-oil particles protection in industries widely, such as construction, mining, textile, manufacturing, wood, processing, pharmacy, electronics and automotive manufacturing.
Features : – Prevent non-oil particles and the filtering efficiency exceeds 95%- Honeywell’s professional anti-counterfeiting filter material to guarantee good quality- The built-in nose clip resists bending, is apt to shape and and have a better fitness and safety without metal exposure- The nose clip is made of high-strength plastic composite metal, and its bending resistance capacity is enhanced significantly compared with the metal nose clip- The advanced sealing material is used for the nose pad, characterized by high fitness, softness and comfort. It can relieve the pressure on the nose bridge and make you feel more comfortable.- The elastic headband can help to relieve the pressure from the head and it is suitable for long hours of use – The big size offers much breathing space inside
FITTING INSTRUCTIONS (please follow the steps listed below when it comes to headbands) : 1. Cup the respirator in the hand, allowing the head straps to hang freely.2. Hold the respirator under the chin with the nosepiece facing outwards. Place the lower head strap around the neck below the ears.3. Holding the respirator against the face with one hand, place the top head strap above the ears, around the crown of the head.4. Place hands on each side of the respirator and move slightly right, left, up and down, to adjust the position of the respirator and achieve the most optimal fit on the face.
FIT-CHECK THE FACE-SEAL AS FOLLOWS :1. Place both hands over the respirator – do not disturb the position of the respirator.2. Inhale sharply (a negative pressure should be felt inside the respirator).3. If you detect air-leaks, readjust the head straps and/or the nose-piece.
