220 views

3Mâ„¢ Tape Primer 94 can be used to promote adhesion of tapes to surfaces such as polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces.

Techniques Surface Preparation :
The bonding surface must be relatively clean and dry. Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture. A clean lint-free cloth should be used.

Application :
1. Shake 3M Primer 94 well before using. Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface.
2. Allow 3M Primer 94 to dry thoroughly before applying tape. This is usually accomplished in 5 minutes at room temperature. Ensure that the primed surface remains free from contaminants prior to applying the tape.

P/S : Porous surfaces may require 2 applications of 3M Primer 94 for uniform coverage and good adhesion. Allow first application of primer to dry before applying the second coat. 3M Primer 94 may be applied with brush or swab. It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment.

How to clean up :
3M Primer 94 can be removed with acetone. Vigorous scrubbing may be
required. Test in small area to insure acetone will not affect the substrate surface.

TAKE NOTE :
Carefully read and follow manufacturer’s precautions and directions for use
when handling cleaning solvents.

If you think it's interesting, please share thisShare on FacebookTweet about this on Twitter

You might be also interested: